Super-Bright Red LED Remote Displays for Logan Weighbridges

2015-12-23T09:00:20+00:00 23rd December 2015|

As part of repairs to a Logan City weighbridge, AccuWeigh installed two new, Aurora LED remote displays. The Aurora 45 remote displays use super-bright red LEDs which are highly visible, even in mid-day sun. The 4.5 inch (114mm) digits provide an easy-to-read weight display as a convenience to vehicle drivers. Read More

Steel Deck Weighbridge and Sub-Frame for NSW Site with Contaminated Soil

2015-12-21T13:02:07+00:00 21st December 2015|

AccuWeigh New South Wales recently supplied, installed and commissioned an 18m above ground, steel deck weighbridge to a waste recycling facility in Sydney. As this was an existing, fully operational site, the customer chose to purchase a steel deck weighbridge to minimise disruption to their site traffic. Read More

Another 20m Weighbridge for Waste Collection Company

2015-12-16T14:10:37+00:00 16th December 2015|

AccuWeigh's has again installed and commissioned another 20m weighbridge for a waste collection company in the Brisbane area. AccuWeigh continues to be the preferred supplier of weighbridges for this company with several other 20m weighbridges already constructed and commissioned at the company's other waste collection sites. Read More

NSW Cosmetics Manufacturer Improves Production with Weighing

2015-12-16T14:03:28+00:00 16th December 2015|

AccuWeigh recently converted a stainless steel tank, for a northern NSW cosmetics manufacturer, in to a weigh tank by installing four shearbeam load cells, one under each tank leg. In doing this, immediate production benefits became available to this customer by understanding how much product is currently in the tank. Read More

Truck Body Builder Uses Low Profile Axle Weigher to Check Mods

2015-12-16T13:58:54+00:00 16th December 2015|

One of AccuWeigh's popular low profile axle weighers, our model LPAX, was recently installed at a truck body building company in Bundaberg, in southern Queensland. The LPAX is an economical alternative to a full length weighbridge and its very low profile (the weighing surface being just 64mm above ground level), compared to other axle weigher designs, means that it can deliver a more than acceptable accuracy for weighing vehicles. Read More

SA Quarry’s Weighbridge Converted from Mechanical to Electronic

2015-12-03T13:19:34+00:00 3rd December 2015|

AccuWeigh's Port Adelaide branch recently completed a refit of an older steel deck Hawke mechanical in-ground pit weighbridge for a quarry at Reynella. With the deck needing repairs to remain viable, AccuWeigh were on hand to decommission the weighbridge and support the client during the deck removal. With the deck out of the foundation AccuWeigh removed the mechanical lever system and created plinths in the foundation for supporting new loadcells. Read More